How to Fix Xbox one turns on then off


In some cases, Xbox one turns on then off immediately, and in some cases after a few seconds. If your control panel continues to shut down, you can quickly fix it by following a few steps. Keep in mind that there can be a number of reasons why this is happening to your console. It can be a major hardware problem, poor cable and some people have reported it after a software update. This guide covers all solutions; remember to try all of them and hopefully one of them will fix the problem.

Reasons Why Your Xbox One Keeps Turning Off

The reasons why your Xbox keeps turning off are shown below:

A very common problem is console overheating. These are just some of the many reasons why your Xbox keeps shutting down. I will discuss these issues one by one so you can identify your problem so you can make sure it doesn’t happen again.

Liquid on Motherboard

If you spilled liquid on your Xbox One, it may have hit the motherboard and damaged it. It’s not something you can fix on your own unless you’re an expert. We recommend that you contact Microsoft support or go to the nearest service center for repair.

Faulty PSU

Xbox requires a large amount of power to start up during the initial startup phase. This must be provided by the power supply unit (PSU). If the power supply doesn’t do the job, the Xbox will turn on but not, so the Xbox will turn off immediately.

Troublesome Power Brick

This is the confirmed reason if Xbox One X turns itself off or Xbox One X turns on and then turns off immediately. The power brick is responsible for maintaining power at the time of start-up and also later. If the power supply fails, it will also affect the start-up.

Overheating console

If the Xbox’s power turns off when plugged into the console, or if the Xbox turns itself off, one of the causes could be overheating, which is quite common in hardware that runs heavy software.

It can also happen due to poor ventilation of the dashboard. If the fan isn’t working properly, or the software responsible for maintaining the system temperature isn’t working properly, the console can heat up, which can cause startup issues on the Xbox.

Keep your system cool by making sure all fans are running and the system is not overheating due to software. It’s good for the health of your console.

How to Fix “Xbox One Turns on Then Off”


To repair Xbox, you will need to have the basic troubleshooting skills required in these repair techniques. But don’t worry, I’ll walk you step-by-step through everything to keep you up to date. Here’s a recap to fix the ignition that followed the Xbox One S’s extinction:

Here you can find 5 simple solutions for fixing the issues related to Xbox one turns on and off

  • Check the Power Supply
  • Factory Reset the Xbox One
  • Try pressing the eject button repeatedly
  • Try a blow dryer
  • Try to remove the external HDD

Check the Power Supply

This can happen depending on the power source you are using to connect your Xbox to the power source. Check if you’re connecting directly to a wall outlet or if you’re plugging your Xbox into the power bar.


If you are using the power bar, switch to a wall outlet. The Xbox One has a surge protector built into its power bars, so you should try plugging the console directly into a wall outlet.

If the power source also uses several other devices, remove them and connect only one device to the outlet. This should fix the problem your Xbox One S will turn on and then off.

Factory Reset the Xbox One

Another solution when Xbox One keeps shutting down is to try a full factory reset. This is a common solution that we try on most of our hardware and software devices. Factory reset will restore the device to its original settings and configuration, which can fix the problem that causes Xbox One to turn on and off.

If you do not want to lose our games and apps while resetting the Xbox, carry the reset by the following method:

Go to the settings of your Xbox One.

In the settings, go to the Console Info.

Find Reset Console and click on it.

Click ‘Yes’ when the console asks for confirmation.

Choose the option, “Reset and keep my games and apps”.

This will prevent apps from losing data and reset the control panel at the same time. Hopefully, this will fix any issues caused by a changed configuration or an update that doesn’t match the rest of your device.

Try pressing the eject button repeatedly


This is a hit-and-trial fix because it works for some people and doesn’t work for some. Try to press the eject button on your console at least 5-10 times in a row. And check if the problem is solved. If not, don’t continue.

Try a blow dryer

It’s hard and you have to be careful. The problem could be poor ventilation or something stuck in the vent on the Xbox. It could also be moisture or something solid. To solve this problem, you can use a hairdryer.

Blow air through the hairdryer into the vent on the Xbox. Make sure the air is not too hot by checking its temperature first.

Blow air for 3 to 5 minutes through the aerators. Also, try turning on the power. Blowing hot air through the fan and synchronizing the heat will also help with the problem. It’s like a last resort after nothing has worked.

Do not abuse this trick as extra heat can damage your system.

Try to remove the external HDD

This is simple. You just have to remove the external HDD from the Xbox. Turn the Xbox on. Check if the issue has been resolved. It is similar to removing a USB drive discussed above.

Final words of Xbox one turns on then off

In this conclusion of Xbox one turns on then off, you can find the reasons and solutions for the issues.

Try to do this fixing at your risk the techmoze team will not be responsible for any error or occurrence. if the solution helpful share to your friends and read more guides below:

4 Mind-Blowing ways to Fix when your ps4 controller is red?

Where is the clipboard on my iPhone

Leave a Reply